# Reveille Mill Spring, Nevada

Reveille Mill Spring in Nevada. 84°F (29°C). Roadside · Public Land. Nye County.

- Page: https://www.soakingsprings.com/hot-springs/nevada/reveille-mill-spring
- Source: Soaking Springs, researched and maintained by Armen Suny
- Updated: 2026-09-14

## Can you soak at Reveille Mill Spring?

The water leaves the ground at 84°F, about as warm as a heated pool. You can drive right up to it. It's on Bureau of Land Management land. We haven't confirmed whether it has a pool or charges a fee.

## Key facts

| Fact | Value |
|---|---|
| Source water temperature | 84°F (29°C) (USGS record; developed pools are often cooled) |
| pH | 7.7 (Slightly Alkaline) |
| Total dissolved solids | 143 mg/L |
| Elevation | 6,422 ft |
| Access | Roadside · Public Land, 212 ft from the nearest road |
| Land | Tonopah Field Office, Bureau of Land Management |
| County | Nye County |
| Nearest town | Tonopah |
| Coordinates | 37.99600, -116.38900 |
| Best months to soak | January, December, February (largest gap between water and average air temperature) |

## About Reveille Mill Spring

Reveille Mill Spring, a warm spring on Tonopah Field Office BLM land in Nye County, sits about 46 miles from Tonopah. Warm, in this case, is cooler than a bath, short of body heat. Access is open. The water tested very low in dissolved solids back in 1967, close to plain water.

Roadside, a couple hundred feet from the track, which is unnamed on record. It sits high, above 6,400 feet, dry at about eight inches of precipitation and two feet of snow in a normal winter. The Tonopah Field Office is the managing unit, and nothing on file describes the pool itself.

The record favors winter, December through February. Open BLM land, no fee listed, no campground within the record. The 1967 chemistry has sodium, sulfate and chloride in small amounts; take it as historical. At this temperature a cold day will make the water feel cool, so the winter rating is about the weather, and the water will not warm you much.

## Water chemistry

Lab sample from 1967-08-02 (Water Quality Portal).

| Measure | Value |
|---|---|
| pH | 7.7 |
| Total dissolved solids | 143 mg/L |
| Calcium | 5.8 mg/L |
| Magnesium | 1 mg/L |
| Sodium | 36 mg/L |
| Sulfate | 9.5 mg/L |
| Chloride | 6.3 mg/L |

## Nearby

- Nearest city page: [Hot springs near Goldfield](https://www.soakingsprings.com/hot-springs/near/nevada/goldfield), 53 mi away
- State page: [Hot springs in Nevada](https://www.soakingsprings.com/hot-springs/nevada)
- [Warm Springs, NV](https://www.soakingsprings.com/hot-springs/nevada/warm-springs-nye-county): 145°F source, pH 6.4, TDS 834 mg/L, Short Walk, near Tonopah, Nye County
- [Spring, NV](https://www.soakingsprings.com/hot-springs/nevada/spring-nye-county-10): 86°F source, pH 7.8, TDS 945 mg/L, Short Walk, near Tonopah, Nye County
- [Cedar Spring, NV](https://www.soakingsprings.com/hot-springs/nevada/cedar-spring): 77°F source, Roadside, near Goldfield, Esmeralda County
- [Warm Spring, NV](https://www.soakingsprings.com/hot-springs/nevada/warm-spring-nye-county-2): Warm, Roadside, near Tonopah, Nye County
- [Saulsbury Warm Spring, NV](https://www.soakingsprings.com/hot-springs/nevada/saulsbury-warm-spring): 86°F source, pH 8.1, TDS 229 mg/L, Short Walk, near Tonopah, Nye County
- [Hot Creek Valley Spring, NV](https://www.soakingsprings.com/hot-springs/nevada/hot-creek-valley-spring): 142°F source, Short Walk, near Tonopah, Nye County

## Questions

**What is the water temperature at Reveille Mill Spring?**
Reveille Mill Spring has a water temperature of 84°F (29°C). This is a warm thermal spring.

**Where is Reveille Mill Spring located?**
Reveille Mill Spring is located in Nye County, Nevada at 6,422 feet elevation, near Tonopah. Coordinates: 37.9960°N, 116.3890°W.

**How do I get to Reveille Mill Spring?**
Reveille Mill Spring has Roadside road access (212 ft from the road).

**Is Reveille Mill Spring free to visit?**
Reveille Mill Spring has Open access. It is managed by Bureau of Land Management.

**What minerals are in the water at Reveille Mill Spring?**
Water chemistry analysis shows the presence of pH, Total Dissolved Solids, Calcium, Magnesium, Sodium, Sulfate, Chloride. The pH is 7.7 (slightly alkaline). Total dissolved solids measure 143 mg/L.

## Sources

- USGS thermal springs records, Water Quality Portal lab analyses, OpenStreetMap, Wikipedia/Wikidata, NOAA climate normals