# Tule Spring, Utah

Tule Spring in Utah. 82°F (28°C). Roadside · Public Land. Millard County.

- Page: https://www.soakingsprings.com/hot-springs/utah/tule-spring
- Source: Soaking Springs, researched and maintained by Armen Suny
- Updated: 2026-09-14

## Can you soak at Tule Spring?

The water leaves the ground at 82°F, about as warm as a heated pool. You can drive right up to it. It's on Bureau of Land Management land. We haven't confirmed whether it has a pool or charges a fee.

## Key facts

| Fact | Value |
|---|---|
| Source water temperature | 82°F (28°C) (USGS record; developed pools are often cooled) |
| pH | 7.7 (Slightly Alkaline) |
| Elevation | 4,420 ft |
| Access | Roadside · Public Land, 231 ft from the nearest road (Tule Spring Road) |
| Land | Fillmore Field Office, Bureau of Land Management |
| County | Millard County |
| Nearest town | Delta |
| Coordinates | 39.35000, -113.51500 |
| Best months to soak | January, December, February (largest gap between water and average air temperature) |

## About Tule Spring

Tule Spring is a warm BLM spring far out in Millard County's west desert, about fifty miles from Delta, the nearest town of any size. The water is warm enough to notice and too cool to count as a hot soak, comfortable on a cool morning. Public access is listed as open, and the ground belongs to the Bureau of Land Management's Fillmore Field Office.

Tule Spring Road runs within a couple hundred feet of the spring, so this is a drive-up stop on public land. The country is low desert basin for Utah, around forty-four hundred feet, and among the driest in the record, with something like six inches of precipitation a year and very little snow. Fillmore Field Office manages the surrounding ground.

Winter is the listed season, and with so little snow out here that is a realistic plan. No campground appears on file anywhere near, so this is a long day from Delta or a self-contained overnight on BLM land. The water was sampled in 1983, newer than most springs in this part of the state but still decades old. Access is open on the record.

## Water chemistry

Lab sample from 1983-12-14 (Water Quality Portal).

| Measure | Value |
|---|---|
| pH | 7.7 |
| Calcium | 69 mg/L |
| Magnesium | 35 mg/L |
| Sodium | 200 mg/L |
| Sulfate | 240 mg/L |
| Chloride | 240 mg/L |

## Nearby

- Nearest city page: [Hot springs near Milford](https://www.soakingsprings.com/hot-springs/near/utah/milford), 53 mi away
- State page: [Hot springs in Utah](https://www.soakingsprings.com/hot-springs/utah)
- [South Tule Spring, UT](https://www.soakingsprings.com/hot-springs/utah/south-tule-spring): 77°F source, Short Walk, near Delta, Millard County
- [Unnamed thermal spring, UT](https://www.soakingsprings.com/hot-springs/utah/unnamed-spring-millard-county-2): 77°F source, Short Walk, near Delta, Millard County
- [Unnamed thermal spring, UT](https://www.soakingsprings.com/hot-springs/utah/unnamed-spring-millard-county-1): 81°F source, Short Walk, near Delta, Millard County
- [Coyote Spring, UT](https://www.soakingsprings.com/hot-springs/utah/coyote-spring-3): 82°F source, pH 7.1, Short Walk, near Delta, Millard County
- [Twin Springs, UT](https://www.soakingsprings.com/hot-springs/utah/twin-springs-2): 68°F source, pH 7.7, Roadside, near McGill, White Pine County
- [Unnamed thermal spring, UT](https://www.soakingsprings.com/hot-springs/utah/unnamed-spring-white-pine-county): 68°F source, Roadside, near McGill, White Pine County

## Questions

**What is the water temperature at Tule Spring?**
Tule Spring has a water temperature of 82°F (28°C). This is a warm thermal spring.

**Where is Tule Spring located?**
Tule Spring is located in Millard County, Utah at 4,420 feet elevation, near Delta. Coordinates: 39.3500°N, 113.5150°W.

**How do I get to Tule Spring?**
Tule Spring has Roadside road access, with the nearest road being Tule Spring Road (231 ft from the road).

**Is Tule Spring free to visit?**
Tule Spring has Open access. It is managed by Bureau of Land Management.

**What minerals are in the water at Tule Spring?**
Water chemistry analysis shows the presence of pH, Calcium, Magnesium, Sodium, Sulfate, Chloride. The pH is 7.7 (slightly alkaline).

## Sources

- USGS thermal springs records, Water Quality Portal lab analyses, OpenStreetMap, Wikipedia/Wikidata, NOAA climate normals