# Warm Springs, Utah

Warm Springs in Utah. 79°F (26°C). Roadside · Public Land. Summit County.

- Page: https://www.soakingsprings.com/hot-springs/utah/warm-springs-summit-county
- Source: Soaking Springs, researched and maintained by Armen Suny
- Updated: 2026-09-14

## Can you soak at Warm Springs?

The water leaves the ground at 79°F, about as warm as a heated pool. You can drive right up to it. We haven't confirmed whether it has a pool or charges a fee.

## Key facts

| Fact | Value |
|---|---|
| Source water temperature | 79°F (26°C) (USGS record; developed pools are often cooled) |
| pH | 7.4 (Slightly Alkaline) |
| Elevation | 7,030 ft |
| Access | Roadside · Public Land, 297 ft from the nearest road |
| Land | Uintah and Ouray Reservation, TRIB |
| County | Summit County |
| Nearest town | Francis |
| Coordinates | 40.44700, -110.82800 |
| Best months to soak | December, January, February (largest gap between water and average air temperature) |
| Nearest campground | HADES, 6.5 mi |

## About Warm Springs

Warm Springs in Summit County sits on the Uintah and Ouray Reservation, tribal land, about twenty-six miles from Francis. The water is warm and carries iron among its minerals, according to a 1971 sample. Access is marked unknown, and on tribal land that means the tribe's permission governs, nothing else. The USGS records the site.

High country, a little over seven thousand feet, and one of the snowiest spots here with more than seven feet of snow across a winter and a wet year besides. A road passes within three hundred feet, unnamed on the record. The land designation is Tribal Land, with the owner code DESG and the unit the Uintah and Ouray Reservation. Hades Campground is the nearest listed, about six and a half miles.

Winter is the season on file, though with snow this deep the roadside position may be the only thing that makes a winter visit possible. Before going, contact the reservation's authorities about permission. The chemistry, iron included, dates from 1971.

## Water chemistry

Lab sample from 1971-11-24 (Water Quality Portal).

| Measure | Value |
|---|---|
| pH | 7.4 |
| Calcium | 85 mg/L |
| Magnesium | 27 mg/L |
| Sodium | 23 mg/L |
| Sulfate | 180 mg/L |
| Chloride | 24 mg/L |
| Iron | 20 µg/L |

## Nearby

- Nearest city page: [Hot springs near Midway](https://www.soakingsprings.com/hot-springs/near/utah/midway), 34 mi away
- State page: [Hot springs in Utah](https://www.soakingsprings.com/hot-springs/utah)
- [Midway Hot Springs, UT](https://www.soakingsprings.com/hot-springs/utah/midway-hot-springs-1): 104°F source, pH 7.3, TDS 1,730 mg/L, Roadside, near Midway, Wasatch County
- [Midway Hot Spring, UT](https://www.soakingsprings.com/hot-springs/utah/midway-hot-spring): 115°F source, pH 7.3, TDS 1,730 mg/L, Roadside, near Midway, Wasatch County
- [Warm Ditch Spring, UT](https://www.soakingsprings.com/hot-springs/utah/warm-ditch-spring): 115°F source, Roadside, near Midway, Wasatch County
- [Midway Hot Springs, UT](https://www.soakingsprings.com/hot-springs/utah/midway-hot-springs-2): 100°F source, Roadside, near Midway, Wasatch County
- [Diamond Fork Warm Springs, UT](https://www.soakingsprings.com/hot-springs/utah/diamond-fork-warm-springs): 68°F source, Roadside, near Mapleton, Utah County
- [Unnamed thermal spring, UT](https://www.soakingsprings.com/hot-springs/utah/unnamed-spring-summit-county): 70°F source, Short Walk, near Snyderville, Summit County

## Questions

**What is the water temperature at Warm Springs?**
Warm Springs has a water temperature of 79°F (26°C). This is a warm thermal spring.

**Where is Warm Springs located?**
Warm Springs is located in Summit County, Utah at 7,030 feet elevation, near Francis. Coordinates: 40.4470°N, 110.8280°W.

**How do I get to Warm Springs?**
Warm Springs has Roadside road access (297 ft from the road).

**Is Warm Springs free to visit?**
Warm Springs has Unknown access. It is managed by DESG.

**Can I camp near Warm Springs?**
Yes, Hades is located nearby (6.5 miles away).

**What minerals are in the water at Warm Springs?**
Water chemistry analysis shows the presence of pH, Calcium, Magnesium, Sodium, Sulfate, Chloride, Iron. The pH is 7.4 (slightly alkaline).

## Sources

- USGS thermal springs records, Water Quality Portal lab analyses, OpenStreetMap, Wikipedia/Wikidata, NOAA climate normals
- https://en.wikipedia.org/wiki/Hot_spring
